Product Details:
Payment & Shipping Terms:
|
Usage: | Compression Force Measurement | Structure: | Flat Force Plate |
---|---|---|---|
Force Range: | 50kgf 100kgf 200kgf | Output: | Analog Load Cell |
Force Plate Load Cell 500N 1kN 2kN Low Profile Compression Sensor
Low Profile Force Plate Load Cell FCFE is made of stainless steel based on strain gauge technology intended for compression force measurement, flat load cell FCFE offers 0-500N / 0-1kN / 0-2kN three rated capacities to choose from. Low height design, large contact surface, Low profile plate transducer FCFE can be easily mounted under load structure without taking up too much space. Force plate sensor FCFE alsocan be modified or customized upon request.
Dimensions
Specifications
Capacity |
50kgf / 500N / 110lb 100kgf / 1kN / 220lb 200kgf / 2kN / 450lbf |
Rated output | 1.0mV/V |
Excitation | 3-15V |
Zero balance | ±0.05mV/V |
Nonlinearity | ±0.5% R.O. |
Hysteresis | ±0.5% R.O. |
Nonrepeatability | ±0.2% R.O. |
Creep(10min) | ±0.1% R.O. |
Safe overload | 150% F.S. |
Ultimate overload | 200% F.S. |
Compensated temperature | -10...+40oC |
Operating temperature | -20...+60oC |
Temperature shift zero | ±0.02% R.O./oC |
Temperature shift span | ±0.02% R.O./oC |
Input resistance | 750±100 ohms |
Output resistance | 750±100 ohms |
Insulation resistance | >2000M ohms |
Ingress protection | IP62 |
Material of element | Stainless steel |
Cable | Ø3*3000mm 4-core shielded cable |
Wiring code |
Red--Excitation+ Black--Excitation- |
Force Plate Load Cell 500N 1kN 2kN Low Profile Compression Sensor
Brief instruction of Rated output(Sensitivity):
Definition: The signal produced by load cell(or force transducer) when rated load is applied, expressed in terms of mV/V. The rated output indicates the output signal range of a sensor.
Sensor output = (Power supply * Rated output) * Load / Capacity
Rated output is flat load cell FCFE is normally around 1.0mV/V.
Power supply of low profile load cell FCFE is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of universal load cell FCFE is normaly within 0mV...+15mV.
Example: Flat Load Cell FCFE-1kN with 1.0mV/V power by 5V DC,the output range is 0mV...+5mV proportional to the applied load.
Load cell + Signal amplifier:
The mV output from the loadcell transducer sometimes cannot be recognized by signal processing units directly,so signal conditioner is introduced to convert mV signal into 0-5V/0-10V/4-20mA for easy signal processing.
Example: Compression Force Load Cell FCFE-2kN working with 0-10V amplifier,the load-output relationship will be 0-2kN load VS 0-10V output,0V output corresponds to 0N, 1V output corresponds to 200N load, 5V output corresponds to 1000N force,and so on.
Force Plate Load Cell 500N 1kN 2kN Low Profile Compression Sensor
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383