 |
|
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Type: | Thin Beam Load Cell | Output: | Analog Sensor |
|---|---|---|---|
| Capacity: | 10kg 20kg 30kg 50kg | Material: | Alloy Steel |
Low Profile Load Cell 50kg 30kg 20kg 10kg Thin Beam Weight Sensor
Thin Beam Load Cell FMZH utilizes strain gauge technology which are bonded on to the alloy steel sensing body. Low profile load sensor FMZH is available in 0-10kg / 0-20kg / 0-30kg / 0-50kg four measuring ranges with maximum 0.2% F.S. non-linearity of the full scale, it offers an accurate & low cost measurement solution for high volume applications, especially suitable for force/load measurement applications where installation space is limited. You may find low profile force sensor FMZH applicable for home appliances, force simulators, process control, robotics, automotive and so on. Other measuring ranges with similar structure can be custom made according to client’s requirements.
Dimensions(in "mm")
Specifications
| Capacity |
100N / 10kgf / 22lbf 200N / 20kgf / 45lb 300N / 30kgf / 67lb 500N / 50kgf / 112lb |
| Rated output | 1.8 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.3mV/V |
| Nonlinearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(3min) | ±0.1% R.O. |
| Safe overload | 120% F.S. |
| Ultimate overload | 150% F.S. |
| Compensated temperature | -10...+40oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.03% R.O./oC |
| Input resistance | 1020±50 ohms |
| Output resistance | 1000±20 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP50 |
| Material of element | Alloy steel |
| Cable | AWG32*110mm |
| Wiring code |
Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A load cell (or loadcell) is a transducer which converts force into a measurable electrical output. Strain gauge based load cells are the most commonly used type and suitable for almost all industrial applications.Strain gauge load sensors contain wheatstone bridge within them to deliver mV output signal which is proportional to the applied load/force under constant power supply, thus the load/force can be measured by measuring the output signal from the transducer.
Low Profile Load Cell 50kg 30kg 20kg 10kg Thin Beam Weight Transducer
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383
