 |
|
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Usage: | Weight Measurement | Type: | Low Profile Load Cell |
|---|---|---|---|
| Output: | Analog Sensor | Load Direction: | Compression |
| Capacity: | 3kN 1.5kN 750N 300N | Material: | Aluminum |
Low Profile Compression Force Transducer 3kN 1.5kN 750N 300N Thin Weight Sensor
Low Height Compression Force Sensor FHA is produced based on strain gauge technology with CE certification. Low profile compression load cell FHA offers 0-300N / 0-750N / 0-1500N / 0-3000N four measuring ranges to choose form, high accuracy with 0.05% non-linearity of the full capacity. Planar Beam Load Cell FHA utilizes 1000ohms gauges which has better performance compared to commonly used 350ohms gauges in terms of power consumption and long term stability. Compact design enables the construction of scales with an extremely low overall height, Thin load cell FHA is also suitable for battery powered weighing devices.
Dimensions(in milimeter)
Specifications
Capacity | 30kg / 300N / 66lb |
| Rated output | 1.5/2.0 mV/V |
| Excitation | 3-10V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.05% R.O. |
| Hysteresis | ±0.05% R.O. |
| Nonrepeatability | ±0.05% R.O. |
| Creep(3min) | ±0.05% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Operating temperature | -10...+40oC |
| Temperature shift zero | ±0.2% R.O./oC |
| Temperature shift span | ±0.05% R.O./10oC |
| Input resistance | 1120±50 ohms |
| Output resistance | 1000±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP65 |
| Material of element | Aluminum alloy |
| Cable | 30kg/75kg — 32AWG 400mm 4-wire 150kg/300kg — 32AWG 150mm 4-wire |
| Wiring code | Red--E+ Black--E- Green--S+ White--S- |
A load cell is a transducer that converts mechanical load into mV signal proportional to the applied load.The acting force causes deformation of the measuring element,the bonded strain gauge deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the transducer.
Brief instruction of Rated output(or Sensitivity):
Definition: The signal produced by load cell(or force transducer) when rated load is applied, expressed in terms of mV/V. The rated output indicates the output signal range of the sensor.
Sensor output = (Power supply * Rated output) * Load / Capacity
Rated output is normally within 1mV/V~3mV/V.
Power supply is normally within 3-15V.
Load / Capacity is within 0-1.
So the load cell output signal is normally within 0-45mV(-45mV...+45mV for bidirectional load cell).
Example one: Planar beam load cell FHA-30kg with 1.5mV/V rated output powered by 10V DC ,the output range is 0~15mV.
Example two: Low profile compression load sensor FHA-300kg with 2mV/V rated output powered by 3.3V DC ,the output range is 0~6.6mV.
Low Profile Compression Force Sensor 3000N 1500N 750N 300N Thin Load Transducer
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383
