 |
|
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Usage: | Force Measurement | Type: | Flange Mounted Force Sensor |
|---|---|---|---|
| Output: | Analog Sensor | Capacity: | 20kN 10kN 5kN 2kN 1kN 500N 200N |
| Force Measurement Direction: | Tension And Compression | Mounting: | Flange-to-Flange |
Flange to Flange Compression Load Cell 2 ton 1ton 500kg 200kg 100kg 50kg 20kg
Flange-to-Flange Type Compression Load Cell FFA is made of stainless steel utilizing strain gauge technology to deliver mV/V output with maximum 0.1% non-linearity of the full scale.Tension Compression Force Sensor FFA offers 0-20kg / 0-50kg / 0-100kg / 0-200kg / 0-500kg / 0-1000kg / 0-2000kg seven measuring ranges to choose from, force transducer FFA can be used for both tension and compression force measurement. Stainless steel construction, flange design, compact size, bidirectional force measurement, high accuracy, Flange Load Cell FFA offers a perfect force measuring solution for applications such as wire tension control, force distribution analysis, automated control, cylinder thrust measurement, assembly force monitoring, spring testing, ultrasonic welding clamp force control, hand press force verification,and so on. In addition to the standard specifications, Forsentek is also capable of and willing to provide custom design service to meet requirements of different applications.
| Ordering code | Measurement Range | Force direction |
| FFA-200N | 0-200N / 0-20kgf | Tension/compression |
| FFA-500N | 0-500N / 0-50kgf | |
| FFA-1kN | 0-1000N / 0-100kgf | |
| FFA-2kN | 0-2000N / 0-200kgf | |
| FFA-5kN | 0-5000N / 0-500kgf | |
| FFA-10kN | 0-10kN / 0-1000kg | |
| FFA-20kN | 0-20kN / 0-2000kg |
Specifications
| Capacity |
200N / 20kg / 45lbf 2000N / 200kg / 450lb 20kN / 2000kg / 4.5klb |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% R.O. |
| Hysteresis | ±0.1% R.O. |
| Nonrepeatability | ±0.05% R.O. |
| Creep(5min) | ±0.05% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 3850±30 ohms |
| Output resistance | 350±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded |
| Wiring code |
Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
The output signal from the wheatstone bridge is normally within -30mV...+30mV. A load cell amplifier can be used to deliver -5~5V, 0-10V or 4-20mA output.
Example: FFA-10kN working with -10-10V amplifier,the Force-Voltage relationship will be 0-10kN compression load VS 0-10V output, 0-10kN tension load VS 0-(-10V) output,when you get 5V output,it means the current load is 5kN compression force,when you get -3V output,it means the current load is 3kN tension force,and so on.
Flange to Flange Compression Load Cell 2000kg 1000kg 500kg 200kg 100kg 50kg 20kg
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383
