Payment & Shipping Terms:
|Usage:||Robot Joint Torque Measurement||Style:||Through Hole Torque Transducer|
|Output:||Analog Sensor||Capacity:||5NM 10NM 20NM 30NM 40NM|
|Type:||Static Torque Sensor|
Low Profile Reaction Torque Sensor Custom Made Hollow Type Torque Transducer
Low Profile Hollow Type Reaction Torque Sensor FTHC is made of stainless steel based on strain gauge technology to deliver maximum 0.3% non-linearity of the rated output,model FTHC offers 5NM / 10NM / 20NM / 30NM / 40NM measuring ranges to choose from.Low profile design,through hole structure,flange to flange mounting,working with servo or stepper motor, Low Profile Torque Transducer FTHC can help make robot joint motion control more smoother. Besides the standard specifications, custom made service according to client's specific requrements is also available at Forsentek.
|Rated capacity||5Nm / 3.7 lb*ft / 50kgf*cm
10N-m / 7.4 lbf*ft / 100 kg*cm
20Nm / 14.8lb*ft 200kg-cm
30N*m / 22.1 lbf-ft / 300 kg*cm
40Nm / 29.5lb*ft / 400 kgf*cm
|Rated output||1.0 mV/V|
|Zero balance||±3% F.S.|
|Safe overload||150% F.S.|
|Ultimate overload||200% F.S.|
|Temp. shift zero||±0.02% F.S./oC|
|Temp. shift span||±0.02% F.S./oC|
|Input resistance||700±100 ohms|
|Output resistance||700±100 ohms|
|Insulation resistance||>2000M ohms|
|Material of element||Stainless steel|
|Cable||Ø3.2*3000mm 4-core shielded cable|
A Reaction Torque Sensor is a transducer that converts mechanical torque into mV signal proportional to the applied torque.The acting torsion causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the moment can be measured by measuring the output signal from the transducer.
Torque sensor output: = (Power supply * Rated output) * Load / Capacity
Rated output is normally within 1mV/V~3mV/V.
Power supply is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of torque meter is normally within -45mV...+45mV.
Example one: Torque cell FTHC-20NM with 1.0mV/V rated output powered by 5V DC, the output range is -5mV...+5mV.
Example two: Torque cell FTHC-30NM with 1.0mV/V rated output powered by 10V DC, the output range is -10mV...+10mV.
Torque transducer + Signal amplifier:
The function of signal amplifier is to convert mV signal into 0-5V/0-10V/4-20mA for easy signal processing.
Example: FTHC-10NM working with -10-10V amplifier,the torque-output relationship will be 0-10Nm torque in clockwise direction VS 0-10V output,0-10Nm torque in CCW direction VS 0-(-10V) output,when you get 5V output, it means the current load is 5Nm torque in CW direction, when you get -10V output, it means the current load is 10Nm torque in CCW direction,and so on.
Low Profile Reaction Torque Transducer Custom Made Hollow Type Torque Sensor