Product Details:
Payment & Shipping Terms:
|
Usage: | Torque Measurement Sensor | Theory: | Strain Gauge Torque Sensor |
---|---|---|---|
Output: | Analog Sensor | Torque Range: | 1kgf*cm 2kgf*cm 5kgf*cm 10kgf*cm 20kgf*cm 30kgf*cm 50kgf*cm 100kgf*cm 200kgf*cm |
Specifications
Capacity |
1 kgf-cm 2 kgf*cm 5kgf-cm 10kgf-cm 20kgf-cm 30 kgf*cm 50kgf-cm 100 kgf*cm 200kgf-cm |
Rated output | 1.0 mV/V |
Excitation | 3-15V |
Zero balance | ±2% R.O. |
Non-linearity | ±0.2% R.O. |
Hysteresis | ±0.2% R.O. |
Non-repeatability | ±0.1% R.O. |
Creep(10min) | ±0.1% R.O. |
Safe overload | 150% F.S. |
Ultimate overload | 200% F.S. |
Compensated temp. | -10...+40oC |
Operating temp. | -20...+60oC |
Temp. shift zero | ±0.02% R.O./oC |
Temp. shift span | ±0.01% R.O./oC |
Input resistance | 700 ohms |
Output resistance | 700 ohms |
Insulation resistance | >2000M ohms |
Ingress protection | IP50 |
Material of element |
0-5NM Aluminum alloy |
Cable | Ø3*3000mm 4-core shielded cable |
Wiring code |
Clockwise |
Small torque sensor FTE with flange mounting
Torque sensor is a transducer that converts a torsional mechanial input into an electrical output signal.Torque value can be displayed by working with torque meter.Digital indicator FPT is integrated with high accuracy 24-bit ADC,up to 960Hz sampling speed make it suitable for both static and dynamic measurement.FPT also supports RS485/RS232 communication interface and 0-10V/0-5V/4-20mA signal output proportional to the measured torque which can be collected by PLCs.
Dimensions(unit in "mm")
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383