 |
|
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Usage: | 3-axis Force Measurement | Theory: | Multi Axis Force Sensor |
|---|---|---|---|
| Force Range: | 50kN 30kN 20kN 10kN 5kN 3kN 2kN | Output: | Analog Transducer |
Multi Axis Load Cell 50kN 30kN 20kN 10kN 5kN 3kN 3-Axis Force Sensor
3-Axis Load Cell F3H/F3J is designed to measure force in Fx/Fy/Fz at the same time.Multi component force transducer F3H/F3J offers 2kN / 3kN / 5kN / 10kN / 20kN / 30kN / 50kN measuring ranges to choose from,each axis is able to measure force in both tension and compression direction.Stainless steel construction,low profile design makes tri-axial load cell F3H/F3J suitable for 3-axis force measurement applications with limited mounting space.You may find multi-axis sensor F3H/F3J interchangeable with interface Multi Axis Force Sensor 3A160 series. Typical applications of this type of transducer are for example force exertion control in robotics, automotive crash testing, industrial test benches, grinding force control, actuator operating force measurement,etc.
Dimensions(in milimeter)
Specifications
| Rated Capacity | 2000N / 450lb / 200kg 3000N / 675lb / 300kg 5000N / 1.12klb / 500kg 10kN / 2.25klb / 1000kg 20kN / 4.5klb / 2000kg 30kN / 6.75klb / 3000kg 50kN / 11.2klb / 5000kg |
| Sensitivity | 1.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Non-linearity | ±0.3% R.O. |
| Hysteresis | ±0.3% R.O. |
| Non-repeatability | ±0.1% R.O. |
| Creep(5min) | ±0.05% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | 0...+40oC |
| Operating temperature | -10...+60oC |
| Temperature shift on zero | ±0.03% R.O./oC |
| Temperature shift on span | ±0.02% R.O./oC |
| Input resistance | 700±100 ohms |
| Output resistance | 700±100 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP65 |
| Material of element |
F3H: Stainless steel F3J: Alloy steel |
| Cable | Ø6*3000mm 12-core shielded |
| Wiring code | 4-wire connection for each axis |
Load cell zero output:The output signal of the loadcell with no-load applied,expressed in mV/V or as a percentage of rated output.The zero output is caused by the stress during strain gauge bonding,it can be handled during calibration or signal processing without affecting the measurement accuracy.A 3-Axis Sensor is a force transducer that measures forces in Fx, Fy, Fz direction at the same time,each axis consists of a full wheatstone bridge to deliver mV/V output proportional to the applied load, a 3-channel load cell amplifier LC3A can be used to convert the mV signal into -5-5V, 0-10V, 4-20mA for easy signal processing. 3 axis load cell F3J/F3H can also be modified or customized as per client's request.
Multi-Axis Force Sensor 50kN 30kN 20kN 10kN 5kN 3kN 2kN Tri-axial Load Cell
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383
