Product Details:
Payment & Shipping Terms:
|
Usage: | Force Measurement | Mounting: | Flange-to-Flange |
---|---|---|---|
Capacity: | 50N 100N 200N 500N 1000N 2000N | Force Measurement Direction: | Tension And Compression |
Type: | Flange Mounted Force Transducer |
Flange Type Load Cell 10 lb 20 lbf 50lb 100 lbf 200lb 450 lb Flange Mounted Force Sensor
Miniature Flange Mounted Force Transducer FFG is made of stainless steel utilizing strain gauge technology to deliver maximum 0.1% non-linearity of rated output.Miniature Flange Load Cell FFG offers 0-11.2 lb / 0-22.5lb / 0-45 lb / 0-112lb / 0-225 lb / 0-450lb six rated capacities to choose from, model FFG can be used for both tension and compression force measurement. Stainless steel construction, flange design, compact size, bidirectional force measurement, high accuracy, Miniature Force Sensor FFG offers a perfect mixture for applications such as wire tension control, force distribution analysis, automated control, cylinder thrust measurement, assembly force monitoring, spring testing, ultrasonic welding clamp force control, hand press force verification,and so on. In addition to the standard specifications, Forsentek is also willing to provide custom design service to meet requirements of different applications.
Dimensions(Unit in "mm")
Ordering code | Measurement Range | Force direction |
FFG-50N | 0-50N / 0-5kgf | Tension/compression |
FFG-100N | 0-100N / 0-10kgf | |
FFG-200N | 0-200N / 0-20kgf | |
FFG-500N | 0-500N / 0-50kgf | |
FFG-1kN | 0-1000N / 0-100kgf | |
FFG-2kN | 0-2000N / 0-200kgf |
Specifications
Capacity |
50N / 5kg / 11.2lb 100N / 10kg / 22.5 lb 200N / 20kg / 45lbf 500N / 50kg / 112 lb 1000N / 100kg / 225lb 2000N / 200kg / 450 lb |
Rated output | 2.0 mV/V |
Excitation | 3-15V |
Zero balance | ±0.05mV/V |
Nonlinearity | ±0.1% R.O. |
Hysteresis | ±0.1% R.O. |
Nonrepeatability | ±0.05% R.O. |
Creep(5min) | ±0.05% R.O. |
Safe overload | 150% F.S. |
Ultimate overload | 200% F.S. |
Compensated temperature | -10...+40oC |
Operating temperature | -20...+60oC |
Temperature shift zero | ±0.02% R.O./oC |
Temperature shift span | ±0.02% R.O./oC |
Input resistance | 350±30 ohms |
Output resistance | 350±5 ohms |
Insulation resistance | >2000M ohms |
Ingress protection | IP62 |
Material of element | Stainless steel |
Cable | Ø3*3000mm 4-core shielded |
Wiring code |
Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Force Sensor is a transducer that converts mechanical load into mV signal proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output is normally within 1mV/V~3mV/V.
Power supply is normally within 3-15V.
Load / Capacity is within 0-1.
So the load cell output signal is normally within 0-45mV(-45mV...+45mV for bidirectional load cell).
Example one: Flange Type Load Cell FFG-500N with 2.0mV/V sensitivity powered by 5V DC,the output range is -10mV...+10mV(Tension and compression).
Example two: Flange Type Force Transducer FFG-200N with 2.0mV/V sensitivity powered by 10V DC,the output range is -20mV...+20mV(Tension and compression).
A signal conditioner can be used with the load cell to deliver -5~5V, 0-10V or 4-20mA output.
Example: FFG-500N working with -5-5V amplifier,the Force-Voltage relationship will be 0-500N compression load VS 0-5V output, 0-500N tension load VS 0-(-5V) output,when you get 3V output,it means the current load is 300N compression force,when you get -2V output,it means the current load is 200N tension force,and so on.
Flange Type Force Sensor 10 lb 20 lbf 50lb 100 lbf 200lb 450 lb Flanged Force Transducer
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383