Forsentek Co., Limited

Sales & Support
Request A Quote - Email
Select Language
English
Spanish
Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsRotary torque sensor

Shaft to Shaft Rotary Torque Transducer 1kg*cm 2kgf*cm 5kg-cm 10kgf*cm 20kgf-cm 50kg*cm

Good quality 3 axis force sensor for sales
Good quality 3 axis force sensor for sales
I'm Online Chat Now

Shaft to Shaft Rotary Torque Transducer 1kg*cm 2kgf*cm 5kg-cm 10kgf*cm 20kgf-cm 50kg*cm

China Shaft to Shaft Rotary Torque Transducer 1kg*cm 2kgf*cm 5kg-cm 10kgf*cm 20kgf-cm 50kg*cm supplier
Shaft to Shaft Rotary Torque Transducer 1kg*cm 2kgf*cm 5kg-cm 10kgf*cm 20kgf-cm 50kg*cm supplier Shaft to Shaft Rotary Torque Transducer 1kg*cm 2kgf*cm 5kg-cm 10kgf*cm 20kgf-cm 50kg*cm supplier Shaft to Shaft Rotary Torque Transducer 1kg*cm 2kgf*cm 5kg-cm 10kgf*cm 20kgf-cm 50kg*cm supplier Shaft to Shaft Rotary Torque Transducer 1kg*cm 2kgf*cm 5kg-cm 10kgf*cm 20kgf-cm 50kg*cm supplier

Large Image :  Shaft to Shaft Rotary Torque Transducer 1kg*cm 2kgf*cm 5kg-cm 10kgf*cm 20kgf-cm 50kg*cm

Product Details:

Place of Origin: China
Brand Name: Forsentek
Certification: CE
Model Number: FY02

Payment & Shipping Terms:

Minimum Order Quantity: 1pc
Packaging Details: 1pc/box
Delivery Time: 3~20 working days
Payment Terms: T/T,Western Union or Paypal
Supply Ability: 1600pcs/month
Contact Now
Detailed Product Description
Usage: Measure Torque Theory: Strain Gauge Torque Sensor
Output: Analog Sensor Torque Measurement Direction: Clockwise&Counterclockwise
Capacity: 0.1Nm 0.2N*m 0.5N-m 1N*m 2Nm 3N*m 5Nm

Shaft to Shaft Rotary Torque Transducer 1kg*cm 2kgf*cm 5kg-cm 10kgf*cm 20kgf-cm 50kg*cm

Miniature Shaft Type Rotary Torque Sensor FY02 is a slip-ring type torque transducer intended for rotating torque measurement in both clockwise and anticlockwise direction,slip rings are used to conduct the millivolt signal from the wheatstone bridge bonded on the sensing shaft which rotates together with motor shaft and gets the torque measured with maximum 0.2% non-linearity of the full capacity. Dynamic torque meter FY02 offers 1kgf*cm / 2kg*cm / 5kgf*cm / 10kg*cm / 20kg*cm / 30kgf*cm / 50kg-cm seven rated capacities to choose from. Keyed shafts located on both ends of the sensor can be connected to motor shaft and load shaft through couplings. Rotating speed of model FY02 goes up to 4000RPM, signal conditioner and display unit is also available at Forsentek. Typical applications for this type of torque cell are for example servo motor torque measurement, torque control for blenders, test bench applications, screw driver calibration, actuator test,etc..

shaft to shaft dynamic torque sensor

Dimensions

shaft type rotary torque transducer
Specifications

Capacity

0.1Nm / 0.88 lbf*in / 1kgf*cm

0.2N-m / 1.77 lbf-in / 2 kg*cm

0.5N*m / 4.4 lbf*in / 5kg-cm

1N-m/ 8.8 lb-in / 10kgf-cm

2N*m / 17.7 lbf*in / 20 kg*cm

3Nm / 26.5 lbf-in / 30 kgf*cm

5N-m / 44 lbf*in / 50kg*cm

Rated output 1.0 mV/V
Excitation 3-15V
Zero balance ±0.05mV/V
Nonlinearity ±0.2% R.O.
Hysteresis ±0.2% R.O.
Nonrepeatability ±0.1% R.O.
Creep(10min) ±0.1% R.O.
Safe overload 150% F.S.
Ultimate overload 200% F.S.
Compensated temp. -10...+40oC
Operating temp. -20...+60oC
Temp. shift zero ±0.02% R.O./oC
Temp. shift span ±0.02% R.O./oC
Input resistance 380±30 ohms
Output resistance 350±5 ohms
Insulation resistance >2000M ohms
Ingress protection IP40
Material of element Stainless steel
Cable Ø5*3000mm 4-core shielded cable
Wiring code

Clockwise@

Red--Exc+ Black--Exc-
Green--Sig+ White--Sig-

 

A torque sensor is a transducer that converts mechanical torque into mV signal proportional to the applied torque.There are two types of torque transducers: Reaction type torque sensor and rotary type torque sensor. The acting torsion causes deformation of the measuring element,the bonded strain gauge deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the moment can be measured by measuring the output signal from the transducer.The output range of FY02 is normally within -15mV...+15mV, signal amplification may be required for most applications, a signal conditioner can be used to get -5~5V, 0-10V or 4-20mA output for easy data processing.Digital meter can be used to display the torque value,digital indicator FPT is integrated with high accuracy 24 bit Sigma-Delta ADC,sampling speed up to 960Hz,supports RS485 or RS232 communication port,can also output 0-5V,0-10V,0-20mV or 4-20mA amplified signal.

shaft to shaft rotary torque meter

Click here to download datasheet

Contact Details
Forsentek Co., Limited

Contact Person: Mr. Tarik Lu

Tel: 86-755-84536383

Send your inquiry directly to us (0 / 3000)