 |
|
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Usage: | Weight Measurement | Type: | Arduino Load Cell |
|---|---|---|---|
| Output: | Analog Sensor | Capacity: | 1kg 2kg 3kg 5kg 10kg(10N 20N 30N 50N 100N) |
Small size load cell arduino weight sensor 10kg 5kg 3kg 2kg 1kg
Features
Specifications
| Rated capacity | 0.5kg 1kg 2kg 3kg 5kg 6kg 10kg |
| Rated output | 1.0 mV/V |
| Excitation | 3-10 V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.05% of R.O. |
| Hysteresis | ±0.05% of R.O. |
| Nonrepeatability | ±0.05% of R.O. |
| Creep(3min) | ±0.05% of R.O. |
| Safe overload | 120% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temperature | 0...+40oC |
| Operating temperature | -10...+60oC |
| Temperature shift zero | ±0.03% of R.O./oC |
| Temperature shift span | ±0.02% of R.O./oC |
| Input resistance | 1000±100 ohms |
| Output resistance | 1000±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Aluminum alloy |
| Cable | 32AWG*170mm(Longer cable available) |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Small size load sensor FMZK is a transducer that converts mechanical force into electrical signal proportional to the applied force or weight.The measured load or force causes deformation of the measuring element(elastic body),the bonded strain gauge deforms accordingly which will cause the impedance variation of the wheatstone bridge,under constant power supply, the output signal changes proportionally, thus the weight or force can be measured by measuring the output signal from the load cell.This load cell can be connected with arduino board through HX711.
Dimensions(unit in milimeter)
Ordering code:
FMZK-0.5kg FMZK-1kg FMZK-2kg FMZK-3kg FMZK-5kg FMZK-6kg FMZK-10kg
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383
