 |
|
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Usage: | Press Force Measurement | Type: | Small Load Cell Sensor |
|---|---|---|---|
| Capacity: | 5kg 10kg 20kg 50kg 100kg 200kg 500kg | Structure: | Miniature Button Load Cell |
| Output: | Analog Transducer | ||
| High Light: | small load cell 50kg,weight sensor 50kg,weight sensor 500N |
||
Small Load Cell 50kg Micro Press Transducer 500N Miniature Compression Sensor 100lb
Small Compression Load Cell FCLB is made of stainless steel based on strain gauge technology which offers 5kg / 10kg / 20kg / 50kg / 100kg / 200kg / 500kg seven rated capacities to choose from,compact design makes button type load cell FCLB suitable for compression force measurement applications with limited mounting space. Each sensor comes with a 3-meter-long shielded cable, 4xM2.5 threaded holes located on the bottom make it easy to mount force sensor FCLB to a flat platform,you may find Miniature Force Transducer FCLB suitable for applications such as load distribution analysis, mold pressure measurement, force overload protection, clamping force measurement, assembly force monitoring, hydraulics force control and so on. A force sensor is a transducer that converts force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the force can be measured by measuring the output signal from the load cell. Miniature Button Load Cell FCLB is designed to measure compression force,outputs millivolt signal ranging 0~20mV, and signal amplification may be required for most applications, a load cell signal conditioner can be used to get 0-5V, 0-10V or 4-20mA signal proportional to applied force.The amplified output then can be easily processed by PLCs and data acquisition software.The force can be displayed through force indicator,force meter FPT is integrated with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for both static and dynamic measurement;FPT also supports Modbus RTU protocol with RS485 or RS232 communication port,amplified signal 0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.
Dimensions(unit in "mm")
Specifications
| Capacity |
50N / 5kg / 10lb 100N / 10kg / 20lb 200N / 20kg / 45lb 500N / 50kg / 110lb 1kN / 100kg / 220 lbf 2kN / 200kg / 450 lb 5kN / 500kg / 1120 lbf |
| Rated output | 1.5mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.5% of the capacity |
| Hysteresis | ±0.5% of the capacity |
| Nonrepeatability | ±0.2% of the capacity |
| Creep(3min) | ±0.1% of the capacity |
| Safe overload | 150% of the capacity |
| Ultimate overload | 200% of the capacity |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 1000±100 ohms |
| Output resistance | 1000±100 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded cable |
| Wiring code |
Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Brief instruction of Rated output(or Sensitivity):
Definition: The signal produced by load cell(or force transducer) when rated load is applied, expressed in terms of mV/V. The rated output indicates the output signal range of a sensor.
Sensor output = (Power supply * Rated output) * Load / Capacity
Rated output of Small Load Cell FCLB is normally around 1.5mV/V.
Power supply of Small Compression Sensor is normally within 3-12V.
Load / Capacity is within 0-1.
So the output range of Miniature Button Load Cell FCLB is normally within 0...+18mV for compression load measurement.
Example one: Small Compression Load Cell FCLB-500N with 1.5mV/V sensitivity powered by 5V DC,the output range is 0...+7.5mV.
Example two: Miniature Compression Force Sensor FCLB-5kN with 1.4mV/V sensitivity powered by 10V DC,the output range is 0...+14mV.
Small Load Cell 50kg Micro Press Transducer 500N Miniature Compression Sensor 100lb
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383
