Product Details:
Payment & Shipping Terms:
|
Usage: | Compression Tension Force Measurement | Type: | Miniature Force Transducer |
---|---|---|---|
Capacity: | 500N 200N 100N 50N 20N 10N | Structure: | S-beam Jr. Load Cell |
Output: | Analog Sensor | Threaded Hole: | M3/M4 |
High Light: | force sensor 100N,force transducer 100N,tension sensor 100N |
Micro Force Transducer 100N Small Tension Force Sensor 20lb Tension Load Cell 10kg
Micro Force Sensor FSSM offers a compact design for a variety of applications. the S Beam Load Cell series provides accuracy, compact design features, offers 10N / 20N / 50N / 100N / 200N / 300N / 500N / 1000N eight rated capacities to choose from.The Miniature S Beam Load Cell FSSM utilizes metal foil strain gauge technology to deliver 2.0mV/V output with maximum 0.1% non-linearity,the compact design enables the FSSM to be easily embedded into machinery or test equipment – ideal for packaging machinery, assembly machinery or end-of-line test equipment.The Lightweight S-type Force Transducer FSSM features M3/M4 threaded holes on two sides for the mounting of attachments or implements, this micro load cell force sensor can be used for both tension and compression force measurement in applications with limited mounting space. You may find junior S beam load cell FSSM interchangeable with FUTEK load cell LSB200,Mark Miniature Force Sensors Series R04,flintec s-beam force sensor ISA,flintec force transducer ISB,etc..
Specifications
Capacity | 10N / 1kg / 2.2lb 20N / 2kg / 4.4lb 50N / 5kg / 11lb 100N / 10kg / 22 lb 200N / 20kg / 45 lb 300N / 30kg / 67 lbf 500N / 50kg / 110lbs 1kN / 100kg / 220lb |
Rated output | 2.0mV/V |
Excitation | 3-12V |
Zero balance | ±0.05mV/V |
Nonlinearity | ±0.1% of capacity |
Hysteresis | ±0.1% of capacity |
Nonrepeatability | ±0.05% of capacity |
Creep(5min) | ±0.1% of capacity |
Safe overload | 150% of capacity |
Ultimate overload | 200% of capacity |
Compensated temperature | -10...+40oC |
Operating temperature | -20...+60oC |
Temperature shift zero | ±0.03% R.O./oC |
Temperature shift span | ±0.02% R.O./oC |
Input resistance | 380±30 ohms |
Output resistance | 350±5 ohms |
Insulation resistance | >2000M ohms |
Ingress protection | IP62 |
Material of element | Stainless steel |
Cable | Ø2*4000mm 4-core shielded cable |
Wiring code |
Compression@ Green--Signal output+ White--Signal output- |
A force sensor is a transducer that converts force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the force can be measured by measuring the output signal from the load cell. Miniature Tension Compression Load Cell FSSM is designed to measure force in both tension and compression direction,outputs millivolt signal ranging -30~30mV, and signal amplification may be required for most applications, a load cell signal conditioner can be used to get -5-5V, 0-10V or 4-20mA signal proportional to applied force.The amplified output then can be easily processed by PLCs and data acquisition software.The force can be displayed through force indicator,force meter FPT is integrated with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for both static and dynamic measurement;FPT also supports Modbus RTU protocol with RS485 or RS232 communication port,amplified signal 0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.
Micro Force Transducer 100N Small Tension Force Sensor 20lb Tension Load Cell 10kg
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383