 |
|
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Usage: | Compression Force Measurement | Type: | Small Button Load Cell |
|---|---|---|---|
| Capacity: | 500kg 200kg 100kg 50kg 20kg 10kg 5kg | Theory: | Strain Gauge Force Sensor |
| Output: | Analog Transducer | ||
| Highlight: | button load cell 500kg,small weight sensor,weight sensor 500kg |
||
Button load cell 500kg 5000N small weight sensor 5KN press sensor
Miniature Button Load Cell FCLB is made of stainless steel based on strain gauge technology which offers 5kg / 10kg / 20kg / 50kg / 100kg / 200kg / 500kg seven rated capacities to choose from,compact design makes button type load cell FCLB suitable for compression force measurement applications with limited mounting space. Each sensor comes with a 3-meter-long shielded cable, 4xM2.5 threaded holes located on the bottom make it easy to mount force sensor FCLB to a flat platform,you may find Miniature Force Transducer FCLB suitable for applications such as load distribution analysis, mold pressure measurement, force overload protection, clamping force measurement, assembly force monitoring, hydraulics force control and so on.
Dimensions(unit in "mm")
Specifications
| Capacity |
50N / 5kg / 11lb 100N / 10kg / 22 lb 200N / 20kg / 45lb 500N / 50kg / 110lb 1kN / 100kg / 220 lbf 2kN / 200kg / 450 lb 5kN / 500kg / 1120 lbf |
| Rated output | 1.5mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.5% R.O. |
| Hysteresis | ±0.5% R.O. |
| Nonrepeatability | ±0.2% R.O. |
| Creep(3min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 1000±100 ohms |
| Output resistance | 1000±100 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded cable |
| Wiring code |
Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Load Cell is a transducer that converts force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the force can be measured by measuring the output signal from the load cell.Miniature Button Load Cell FCLB is designed to measure force in compression direction,outputs millivolt signal within 0~20mV, and signal amplification may be required for most applications, a load cell signal conditioner can be used to convert mV signal into -5-5V, 0-10V or 4-20mA output which is proportional to applied force.The amplified output then can be easily processed by PLCs and data acquisition software. The force can also be displayed through force indicator,force meter FPT is integrated with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for both static and dynamic measurement;FPT also supports Modbus RTU protocol with RS485 or RS232 communication port,amplified signal 0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.
Miniature Button Load Cell 500kg 200kg 100kg 50kg 20kg 10kg For Compression Force Measurement
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383
