 |
|
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Type: | Compression Traction Load Cell | Capacity: | 5kg 10kg 20kg 50kg 100kg 200kg |
|---|---|---|---|
| Usage: | Force Measurement | Load Direction: | Traction And Compression |
| Output: | Analog Force Sensor | Threaded Hole: | M8-M8 |
20kg Traction Load Cell 50kg Traction And Compression Load Cell 100kg
Miniature Compression And Traction Load Cell FSKA is made of stainless steel based on metal foil strain gauge technology intended for both tension and compression force measurement. Miniature Traction Compression Force Sensor FSKA offers 5kg / 10kg / 20kg / 50kg / 100kg / 200kg six rated capacities with maximum 0.1% non-linearity of the full scale. M8 threaded holes located on both ends can be used to mount attachments like load button, eye bolts, hooks to fit different applications. 35x25x12mm compact design makes compression traction force transducer FSKA a perfect option for force measurement applications with limited mounting space. Push and Pull Load Cell FSKA can also be modified or customized as per request.
A Force Sensor is a transducer that converts mechanical load into mV signal proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of compression and traction force sensor FSKA is normally around 2.0mV/V.
Power supply of push and pull load cell FSKA is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of traction compression load cell FSKA is normally within -30mV...+30mV.
Example: Traction Compression Force Sensor FSKA-500N with 2.0mV/V rated output powered by 5V DC,the output range is -10mV...+10mV.
A signal conditioner can be used with the load cell to deliver -5~5V, 0-10V or 4-20mA output.
Example: FSKA-200N working with -10-10V amplifier,the Force-Voltage relationship will be 0-200N compression load VS 0-10V output, 0-200N tension load VS 0-(-10V) output,when you get 5V output,it means the current load is 100N compression force,when you get -1V output,it means the current load is 20N traction force,and so on.
Specifications
| Capacity |
50N / 100N / 200N / 500N / 1000N / 2000N |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% of R.O. |
| Hysteresis | ±0.1% of R.O. |
| Nonrepeatability | ±0.05% of R.O. |
| Creep(5min) | ±0.05% of R.O. |
| Safe overload | 150% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% of R.O./oC |
| Temperature shift span | ±0.02% of R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 355±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP64 |
| Material of element | Stainless steel |
| Cable | Ø3*2000mm 4-core shielded |
| Wiring code |
Compression@ Green--Signal+ White--Signal- |
Ordering code: FSKA-50N, FSKA-100N, FSKA-200N, FSKA-500N, FSKA-1kN, FSKA-2kN
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383
