Product Details:
Payment & Shipping Terms:
|
Usage: | Brake Force Testing | Force Range: | 200N 500N 1KN 2KN |
---|---|---|---|
Output: | Analog Load Cell |
Car Pedal Load Cell 200kg 100kg 50kgf Brake Force Measurement Sensor
Automotive Pedal Force Sensor FCFA is made of aluminum based on strain gauge technology intended for automotive brake testing during acceleration and deceleration. Pedal force load cell FCFA offers 0-200kgf / 0-100kgf / 0-50kgf / 0-20kgf four rated capacities which enables automotive manufacturers to verify the safety and reliability of their braking mechanics. Pedal Effort Sensor FCFA can also be modified or customized upon request to meet requirements of different testing cases.
Dimensions
Specifications
Capacity |
20kgf / 200N / 45lbs 50kgf / 500N / 110lb 100kgf / 1kN / 220lb 200kgf / 2kN / 450lbf |
Rated output | 2.0mV/V |
Excitation | 3-15V |
Zero balance | ±0.1mV/V |
Nonlinearity | ±0.3% R.O. |
Hysteresis | ±0.3% R.O. |
Nonrepeatability | ±0.1% R.O. |
Creep(10min) | ±0.1% R.O. |
Safe overload | 120% F.S. |
Ultimate overload | 150% F.S. |
Compensated temperature | -10...+40oC |
Operating temperature | -20...+60oC |
Temperature shift zero | ±0.02% R.O./oC |
Temperature shift span | ±0.02% R.O./oC |
Input resistance | 385±30 ohms |
Output resistance | 352±5 ohms |
Insulation resistance | >2000M ohms |
Ingress protection | IP62 |
Material of element | Aluminum alloy |
Cable | Ø3*3000mm 4-core shielded cable |
Wiring code |
Red--Excitation+ Black--Excitation- |
Car Pedal Load Cell 200kg 100kg 50kgf Brake Force Measurement Sensor
Brief instruction of Rated output(Sensitivity):
Definition: The signal produced by load cell(or force transducer) when rated load is applied, expressed in terms of mV/V. The rated output indicates the output signal range of a sensor.
Sensor output = (Power supply * Rated output) * Load / Capacity
Rated output is Brake Pedal Force Sensor FCFA is normally around 2.0mV/V.
Power supply of Pedal Force Transducer FCFA is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of pedal force load cell FCFA is normaly within 0mV...+30mV.
Example: Brake Force Load Cell FCFA-1kN with 2.0mV/V power by 5V DC,the output range is 0mV...+10mV proportional to the applied load.
Load cell + Signal amplifier:
The mV output from the loadcell transducer sometimes cannot be recognized by signal processing units directly,so signal conditioner is introduced to convert mV signal into 0-5V/0-10V/4-20mA for easy signal processing.
Example: Pedal Effort Sensor FCFA-2kN working with 0-10V amplifier,the load-output relationship will be 0-2000N load VS 0-10V output, 0V output corresponds to 0N, 1V output corresponds to 200N load, 5V output corresponds to 1000N force,and so on.
Car Pedal Load Cell 200kg 100kg 50kgf Brake Force Measurement Sensor
Contact Person: Mr. Tarik Lu
Tel: +86 755 84536383