Payment & Shipping Terms:
|Usage:||Torque Measurement||Theory:||Strain Gauge Torque Sensor|
|Output:||Analog Sensor||Capacity:||10NM 20NM 30NM 50NM 100NM 150NM 200NM|
|Torque Measure Direction:||Clockwise And Counterclockwise|
Reaction toqrue transducer|Torque measurement sensor
|Rated capacity||20NM 30NM 50NM 100NM 200NM|
|Zero balance||±2% R.O.|
|Safe overload||150% F.S.|
|Ultimate overload||200% F.S.|
|Temp. shift zero||±0.01% R.O./oC|
|Temp. shift span||±0.01% R.O./oC|
|Input resistance||350±30 ohms|
|Output resistance||350±10 ohms|
|Insulation resistance||>5000M ohms|
|Material of element||Stainless steel|
|Cable||Ø5.5*3000mm(Longer cable available)|
Red--Exc+ Black--Exc- Green--Sig+ White--Sig-
A torque sensor is a transducer that converts a torsional mechanial input into an electrical output signal. Torque transducer can be devided into two types:rotary torque sensor and reaction torque sensor depending on the torque it's going to measure.Rotary torque sensors are able to measure both rotating torque and non-rotating torque while reaction torque transducers can only measure non-rotating torque or torque with small rotating angle.
Flange reaction torque transducer FTG is designed to measure non-rotating torque.The output range of FTG is normally between -20~20mV which is proportional to applied torque, signal amplifier can be used to get ±5V,±10V,0-5V,0-10V or 4-20mA output for easy data acquisition.
Torque meter can be used to display the torque value.Digital indicator FPT is integrated with high accuracy 24-bit ADC,up to 960Hz sampling speed make it suitable for both static measurement and dynamic measurement.FPT also supports RS485/RS232 communication interface and amplified signal output 0-10V/0-5V/4-20mA which is proportional to the measured value.